P6.25 Outdoor Die-Casting Rental LED Display
1.Main Features And Functions
Light weight, ultra-thin and fast installed design, you can install and dismantle LEDventure rental display in a short time.
Different signal transmission direction can provide you different array, which would have different size of LED screen.
With the professional video processor,we can have the AV,DP,VGA,DVI,YOBPR,HDMI,SDI etc.input signal.
256 degree brightness and custom white balance adjustment, we can make the different let of LED screen looks the same.
Signal processor: RTF series production have the single folding technology,the LED module did not cascade connection,it would help the display property.
Mask: With the patent technology, LED module mask was assembled with the rear buckle, it is convenient for the LED lamp front access and maintenance, no fastening screws was seen in the front of the screen,it ensure good integrity of the surface of the screen,after the LED video wall is lighted on, no light can penetrate through.
Module:Large size of LED module,there are just 8 pcs for each cabinet,it ensure the stability of the screen by reducing the inner cable. As the front access, you can maintain the screen without open the cabinet door.
Rear cover: Remove the 4 screws,and take off the rear cover,you can replace and maintain the power supplier and receiving card.
Heat radiation board: LEDventure replace the traditional plastic plate with the aluminum one,it not only keep the LED module flatter,but also have the good property of heat radiation.
IC and drive mode: High refreshment, high gray, With the high quality of professional static drive IC,LEDventure LED rental display can reach 1920Hz at least, even more 4800Hz with a single receiving card. The gray leave can reach up to 16bits,it can meet the requirement of performance and live broadcast. DC power supplier cable apply to the American standard, the power input is SMD Plug seat, it can ensure the stability of the voltage and save the energy of the cable transmission.
Compatible: New cabinet structure design, LEDventure rental display can be hung installation and installation,both for indoor and outdoor,we can\provide you P3.91,P4.81,P5.95,P6.25 both indoor and outdoor rental LED display with this LED cabinet.
Higher gray: 14bits and higher refresh rate: 960 at least.
Low heat and without cooling fan,no noise,low power consumption,lighter on weight and less on human ,saved the cost for you.
LEDventure rental display can be used for outdoor with IP65 protection.
LEDventure rental LED screen was packed with flight case,it would protect rental LED display during the storage and transport.
LEDventure provide you the suitable LED rental display solution according to the installed place and customer’ requirement.
2. Main Technical Specifications
H: 120°; V: 120°
W500mm x H1000mm
-20℃ - +50℃/ 10-90％RH
-40℃ - +60℃/ 10-90％RH
Pixels per panel
25600 pixels / m 2
Recommended viewing distance
65536 levels per color
256 levels of each color(manually),8 levels of each color(automatically)
Video frame rate
Input power frequency
Input power <max>
Input power <typical>
R:620-625nm G:525-529nm B:472-478nm
RF,S-VIDEO,RGBHV,YUV,YC & COMPOSITION, etc
Outdoor rental led display is equipped with Die-casting Aluminum cabinet. It gives the possibility to keep only one spec rental led display, and rent to all the occasions. Widely used in plaza, shopping center, industry and commerce square, bank, exhibition, promotional activity , finance, securities, stations, airports , supermarkets, recreation ,stage and big event show and so on.