P10 SMD Indoor Perimeter Led system
Excellent flatness between cabinets, with claw lock system to link the cabinets;
Impact resistance. Soft rubber mask facia to protect the screen from the players’ impact
and protect the players themselves;
IP65 weatherproof standard, against harsh environment such as water, dust and grass clippings;
Easy power and data connections, daisy chain used from one cabinet to the next for quick connection;
Convenient installation and software setup. No need to number the cabinets;
Long viewing distance and wide viewing angle;
Stable performance and long lifetime;
Excellent after-sales service;
2. Technical Parameters
H: 120°; V: 120°
W960mm x H960mm x D100mm
-20℃ - +50℃/ 10-90％RH
-40℃ - +60℃/ 10-90％RH
Pixels per panel
10000pixels / m 2
Recommended viewing distance
65536 levels per color
256 levels of each color(manually),8 levels of each color(automatically)
Video frame rate
Input power frequency
Input power <max>
Input power <typical>
R:620-625nm G:525-529nm B:472-478nm
RF,S-VIDEO,RGBHV,YUV,YC & COMPOSITION, etc
LEDventure’s Perimeter LED display is an effective and attractive display used in the stadium. It’s favorable for sports live broadcast and commercial advertising. The display can be installed around the whole stadium. You can imagine the strong and visualized impact it brings. Advanced stadium software is used to manage the content of the display instantly. It can automatically calibrate the colors and adjust the color temperature, very user friendly.
4.Packages and Shipping
5. Service Regarding LED Screen
The positive thinking is that - usually one entire led display screen has only one sending card, one cabinet has one receiving card and 3-4 power supplies. So the 1st step is to eliminate the problem possibility of those devices, and for an local engineer with good tech background, it's not quite difficult. If all those possibilities are eliminated, we would focus on the led module tiles.
A tutorial page is limit to describle all, but we would like to let you know - Before you begin to find out which part of the led module tile fails - driving IC or LED or PCB, and after you've tried fixing it, you need to do below steps to inspect:
1.What you need is 3 parts: LED module tile, Flat cable, Receiving card
2. You would find a test button on the receiving card
3.Connect the module and receiving card, with the flat cable. (Please notice a good quality IDC connector would be tight, and you need press heavy. What we choose is the "Rainbow Ribbon Cable" and "IDC Connector with Gold-plated PIN", which is the highest industry standard.)
4.Connect ready, and the following you need to press the test button on the receiving card.
5. Press, and the led display module tile would show "scan test mode".
6. Press, and the led display module tile would show "grey level test mode".
7. Press, and the led display module tile would show "white balance test mode".
8. Press, and the led display module tile would show "red color LED test mode".
9. Press, and the led display module tile would show "green color LED test mode".
10. Press, and the led display module tile would show "blue color LED test mode".
From what's shown on the module, you'd guess out which component or device of the led module title is failed, and fix it according to your conclusion.
But if you think it's too complex, we'd like to provide the service of that. We will see the status to quote the cost of the service.
6. Company Information
LEDventure’s products widely used in outdoor advertising, cultural and recreational activity, stadium, stage background rental, With its full color LED displays advantages. From the raw material test to manufacturing, assembly and aging test, we carrie out every step one by one strictly according international quality control system ISO9001:2008 to guarantee the quality. MRLED ‘s products are approved by CCC, FCC,CE, RoHs, ETL, and IP67.
7. Contact Us