Add: LEDventure Buliding,Lebao Industrial Park,Fengxin RD,Guangming New District,Shenzhen,China.
E-mail: email@example.com , firstname.lastname@example.org
2018 is a rainy year, there are different rainfall in all parts of the country, especially in the central plains, the typhoon in coastal cities has entered a period of high frequency, continuous rainstorm, many cities have been looking at the sea mode, outdoor led screen to introduce the severe test, the rainy season, outdoor led screen water how to do?
1、 is the prevention work, outdoor full-color display screen in the completion of installation of border water package work must be fine, to avoid the occurrence of water phenomenon.
2、in heavy rain or rainstorm weather, turn off led screen and stop using.
3、 after the rain stops, enter the back of the screen to check whether there is water leakage. In case of water inlet, do not turn on the power and open the screen. Use a fan or other tools to completely dry the LED screen with water inlet at the fastest speed.
4、 fully blow-dried screen body is electrified for aging, the specific steps are as follows:
(1) set the brightness (all white) to 10% and electrify for 8-12 hours.
(2) set the brightness (all white) to 30% and electrify for 12 hours.
(3) adjust the brightness (all white) to 60%, and power on for aging for 12-24 hours.
(4) adjust the brightness (all white) to 80%, and power on for aging for 12-24 hours.
(5) adjust the brightness (all white) to 100%, and power on for aging for 8-12 hours.
After the above steps, the leakage problem of the screen body is basically solved, and the led display module, power supply, control card and related connecting wires are fully energized to check whether there are problems and hidden dangers. If there is any problem, the screen body shall be replaced or repaired immediately, and the causes of the leakage of the screen body shall be checked for repair or repair, so as to avoid similar situations in the next time.